VMOA.net
http://starriderperformance.com

Login


Browsing this Thread: 

 Share on Facebook  




Gen1 coils 1and 3 not firing
Just popping in
Joined:
2014/12/22 7:33
From Krugersdorp
Group:
Registered Users - Ultimate
Posts: 1
Level : 1; EXP : 0
HP : 0 / 0
MP : 0 / 0
Offline
I'm having issues with my Gen 1.
On idle cylinders 1 & 3 have spark. As soon as you rev up.. .no spark!
What and how can I check?

Posted on: 2015/1/21 12:05


Re: Gen1 coils 1and 3 not firing
Just popping in
Joined:
2015/2/4 9:05
From Sydney
Group:
Registered Users - Ultimate
Posts: 10
Level : 2; EXP : 0
HP : 0 / 25
MP : 3 / 241
Offline
Alanvmaxer
Mate I'm new to this forum having just recently joined. I don't know if anyone has answered your post elsewhere but I just thought I'd pass on my experience. I ride my Vmax which is now a trike and in early time I had the same problem. I have a 1988 Gen 1.
As both 1 & 3 sit directly over the motor they are subject to heat fatigue despite the heat shield over the heads. Over time the outer coating of the coils become brittle and cracks. It may only be a hairline crack but that's enough for the coil to brake down under load and open circuit. Removal of both coils might find the hairline cracks underneath or along the sides. The bike will idle, but brake down under load.
I had to replace both on mine.
I hope this helps.
Fitzystrike

Posted on: 2015/2/26 10:11






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]